Shenzhen Yizhuo Electronics Co., Ltd
Shenzhen Yizhuo Electronics Co.,Ltd has been established in 2012 years, Our factory area more than 5,000 square meters. We have more than 100 workers and 20 employees.We are Aluminum PCB and FR4 PCB
Add to Cart
Single Sided Aluminum 94v0 PCB Circuit Board Good Heat Dissipation
A thin layer of thermally conductive but electrically insulating dielectric is laminated between a metal base and a copper foil. The copper foil is etched into the desired circuit pattern and the metal base draws heat away from this circuit through the thin dielectric.
Aluminum PCB is a unique metal-based copper clad laminate; it has good thermal conductivity, electrical insulation and machining performance.
Aluminum PCB is one of metal-based pcb, including copper foil, thermal insulating layer and metal substrate, its structure divide into three layers:
The heat dissipation afforded by this construction is dramatically superior to standard FR-4 constructions. The dielectrics used are typically 5 to 10 times as thermally conductive as conventional epoxy-glass and a tenth of the thickness resulting in thermal transfer exponentially more efficient than a conventional rigid PCB.
Although Power Converters and LEDs are the largest users of these products, Automotive and RF companies are also looking to take advantage of the benefits of these constructions. A single layer construction is the simplest, most thermally conductive and most cost effective construction. Designs with higher component counts may not have room for all the required routing on a single layer. In this case a two layer design is required. A thin sheet of dielectric, typically around .006” thick, is drilled, plated and etched much like a standard double sided printed circuit board. The sheet is then laminated using thermally conductive bonding material to the metal base. This extra routing layer results in components farther away from the heat-sink and reduced heat transfer so this construction is recommended only when necessary.
| SERIAL | ITEM | TECHNICAL DATA |
| 1 | Product Name | High quality Base 5630 Led Aluminum Pcb Board |
| 2 | Brand | sunsoar |
| 3 | Layer | 1-24 layers |
| 4 | Max Board Size | 457x610mm |
| 5 | Min Board Thickness | 4(layers)0.40mm/16mil |
| 6(layers)0.80mm/32mil | ||
| 8(layers)1.00mm/40mil | ||
| 10(layers)1.20mm/48mil | ||
| 6 | Min Line Width1 | 0.10mm/4mil |
| 7 | MinLine Spacing | 0.10mm/4mil |
| 8 | Min Hole Size | 0.20mm/8mil |
| 9 | PTH Wall Thickness | 0.020mm/0.8mil |
| 10 | PTH dia tolerance | ±0.05mm/±2mil |
| 11 | NPTH hole dia tolerence | ±0.025mm/±1mil |
| 12 | Outline Tolence | ±0.1mm/±4mil |
| 13 | S/M Pitch | 0.08mm/3mil |
| 14 | Aspect ratio | 10:1 |
| 15 | PCB Wrap and Twist | ≤0.7% |
| 16 | Electric Strength | >1.3KV/mm |
| 17 | Peel Strength | 1.4N/mm |
| 18 | Solder Mask Abrasion | ≥6H |
| 19 | PCB Flammability | 94V-0 |
| 20 | Impedance Control | ±5% |
FAQ:
Q1. Are you a factory or trade company?
A: We have our own PCB manufacturing & Assembly factory.
Q2: Are all your products certified with UL, ROHS etc?
A: Yes, we are certified to ISO9001:2015, ISO14001:2015, IFA, UL , SGS, ROHS.
Q3: What service do you have?
A: We are providing pcb fabrication, components purchasing, pcb assembly, complete assembly.